Seattle STFI Permits for Decks

When a Seattle Deck Needs a Permit

A construction permit is needed for a deck more than 18 inches above the ground or for any roof deck.

Every Project Type in Seattle

These summaries come from the same official sources as our city pages and were last checked October 30, 2026. Permit counts are the city's own open-data records for the last 12 months.

Roofing: Often No

For detached one- and two-family homes, re-roofing and replacing sheathing needs no permit when the building envelope does not change and the work is equal to or better than what exists. You need a construction permit if the re-roof alters the envelope beyond adding or replacing insulation.

• No permit for 1–2 family re-roofs with no envelope change.
• Construction permit if the re-roof alters the building envelope.
• Energy code may require added insulation.
• Seattle issued 455 matching permits in the last 12 months, with a median of 40 days from application to issue.

Source: Seattle SDCI: Re-Roof Permit · Full details: Seattle Roofing Permits

HVAC: Yes

Furnaces and heat pumps need a mechanical (furnace) permit in Seattle, and split systems with refrigerant piping also need a refrigeration permit, which only a licensed contractor can get. New circuits or panel work add an electrical permit.

• Mechanical/furnace permit for furnaces and heat pumps.
• Refrigeration permit for split systems; licensed contractor required.
• Electrical permit if circuits or panel work are involved.
• Seattle issued 12,661 matching permits in the last 12 months, with a median of 0 days from application to issue.

Source: Seattle SDCI: Furnace & Refrigeration Permits · Full details: Seattle HVAC Permits

Fence: Usually No

No permit is needed for a fence up to 8 feet total height without masonry or concrete elements over 6 feet, unless it is in a flood-prone area. Zoning can still limit height in required yards.

• Exempt: fences up to 8 ft with no masonry over 6 ft.
• Permit required in flood-prone areas.
• Zoning height limits still apply.
• Seattle issued 10 matching permits in the last 12 months, with a median of 54 days from application to issue.

Source: Seattle SDCI: Fences · Full details: Seattle Fence Permits

Deck: Sometimes

You need a construction permit for a deck more than 18 inches above the ground or any roof deck. Most decks on neighborhood residential lots get a same-day Subject-to-Field-Inspection (STFI) permit.

• Permit if more than 18 in above ground or a roof deck (SRC R105.2).
• Most decks qualify for an over-the-counter STFI permit.
• Decks over 36 in count toward lot coverage.
• Seattle issued 88 matching permits in the last 12 months, with a median of 7 days from application to issue.

Source: Seattle SDCI Tip 312: Decks, Fences and Arbors

The STFI Route

SDCI Tip 312 says most decks on neighborhood residential lots qualify for an STFI permit, typically issued the same day. Decks more than 36 inches high count toward lot coverage, which can matter on smaller lots.

Seattle Permit Pages

See Seattle Deck Permits and Seattle Building Permits.

How STFI Works

Instead of detailed plan review, an STFI permit is approved at intake and the work is checked by inspectors in the field. That suits decks, whose critical details (footings, ledger attachment, guards) are easiest to verify on site. SDCI Tip 312 describes which projects qualify. Projects that are too complex for STFI go through full plan review, which takes longer; see How Long Does a Building Permit Take? Real Timelines from 10 Cities.

Seattle's Fence and Arbor Rules

Tip 312 also covers fences and arbors. Fences are mainly regulated through zoning height limits, which SDCI's fences page explains. If a fence, arbor or deck is near a property line, check setbacks before you build.

What Happens Without a Permit in Seattle

SDCI's page on construction without a permit says the department can issue a stop work order and fines of up to $500 per day, and points owners to the Seattle Residential Code sections on permits (R105.1, R105.2) and construction documents (R106). It also offers free 20-minute permit coaching, which is a quick way to confirm whether your deck needs a permit. See What Happens If You Build Without a Permit?.

Planning Your Deck Permit

1. Measure height above grade at the highest point; above 18 inches needs a permit.
2. Check lot coverage if the deck will be over 36 inches.
3. Prepare a simple site plan and framing details for the STFI application.
4. Book inspections for footings, framing and final; Building Permit Inspections: What Inspectors Check and When explains each one.

Deck Safety Details Inspectors Check

• Footing size and depth, and post connections.
• Ledger attachment to the house and flashing to keep water out.
• Joist hangers and fasteners rated for exterior use.
• Guard height and baluster spacing on raised decks.
• Stair rise, run and handrails.

These are the details most often wrong on unpermitted decks, and the reason a deck permit is worth having. See When a Deck Needs a Permit: Height and Size Rules by City for other cities.

Who Issues Permits in Seattle

Residential permits in Seattle are issued by the Seattle Department of Construction and Inspections (SDCI). Its website has the current application portal, fee schedule and inspection scheduling. Issued permits are published as open data in Seattle Building Permits, which is the source of the permit counts and recent permits shown on our Seattle pages. Rules and fees change, so confirm with the department before you start work.

Frequently Asked Questions